HP OMEN 27" HDR 165 Hz Gaming Monitor - Manual (Page 24)

The monitor features External Lighting to illuminate a desktop or wall and enhance the gaming experience.
You can adjust the color and brightness of the external light or turn it off in the OSD menu or OMEN Command
Center. There are two independent control zones for External Lighting: Ambient lighting which controls the
lighting located on the back of the monitor that projects on the wall and Bottom lighting that controls the
lighting located at the monitor base that projects onto the desk.
To adjust the external lighting:
1. Press the center of the OSD joystick to open the OSD menu.
2. Select Gaming, and then select External Lighting.
3. Select a setting for Ambient lighting or Bottom lighting:
Ambient Lighting (projects on the wall) and Bottom Lighting (projects on the desk):
● Off: Turns off the external lighting.
● Task Light: Full white and bright setting to emulate an adjustable white desk light for better reading
or viewing.
● Color Cycle: Slowly fades between all static color presets.
● Breathing: Slowly fades on and off. Speed has three settings Slow, Medium, and Fast. Color is
decided by the color selected in the static color menu.
● Color Cycle: Slowly fades between all static color presets.
● Static Color: Sets external lighting colors to Red, Green, Blue, Yellow, Purple, Cyan, Orange, or
custom.
● LED Brightness: Adjusts the external LED brightness.
● Apply to all zones: Applies settings for this zone to all other external lighting zones on the monitor.
● Copy Ambient Zone Sets the lighting setting for this zone to match setting set in Ambient zone
menu.
● Off: Turns off external bottom lighting.
Selecting a faster response time for gaming
This feature allows you to select a faster response time for gaming.
The default response time setting is optimized for gaming purposes. All performance specifications represent
the typical specifications provided by HP's component manufacturers; actual performance can vary either
higher or lower.
To set a faster response time:
1. Press the center of the OSD joystick to open the OSD menu.
2. Select Gaming, and then select Response Time.
3. Cycle through the adjustment levels to increase or decrease response time.
18 Chapter 3 Using the monitor