HP OMEN 27" HDR 165 Hz Gaming Monitor - Manual (Page 13)

2. Use a flathead screwdriver to pry open the VESA cover on the back of the monitor, and remove the VESA
cover (1).
3. Use a screwdriver to remove the six screws that hold the hinge in place (2), and then remove the hinge
(3).
4. Remove the four VESA screws from the back of the monitor and use them to attach the mounting device
as indicated in the following step 6.
5. On the swing arm, rotate the VESA bracket to 45° to line up with the screw holes on the back of the
monitor (1) before attaching the bracket to the monitor.
Attaching the VESA mounting bracket 7