Extron Electronics RGB 201 - Manual (Page 27)

RGB 201 Rxi Universal Interface • Installation and Operation
g
Remote connector — Connect an RS-232 device to this DB
9 female connector (figure 2-9) for remote centering control.
Software for RS-232 control is included with the interface. See
chapter 3, Remote Control for details.
Pin RS-232 Function
1 —
2 TX Transmit data (-)
3 RX Receive data (+)
4 —
5 Gnd Signal ground
6 —
7 — —
8 — —
9 — —
—
—
—
Female
5 1
9 6
Male
1 5
6 9
Figure 2-9 — Remote connector pinout
h
AC power connector — Connect a standard IEC AC power
cord here for power input (100VAC to 240VAC, 50/60 Hz) to the
internal, autoswitching power supply.
2-15