Acer Predator X27U bmiipruzx 27" 1440p HDR 240 Hz Gaming Monitor - Manual (Page 28)

X27U User Guide English 17
6. OSD timeout: Adjust the delay before turning off the OSD menu.
7. Transparency: Select the transparency when using gaming mode. The transparency can be 0% (OFF), 20%, 40%, 60%, or 80%.
8.
OSD Position: The OSD position default is Center, and the display position can be changed to (Top Left, Top Right, Bottom Right,
Bottom Left, and Center).
9. OSD Lock: To choose OSD lock on/off.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note:
OSD Locked:
• Set the OSD Lock to "On" by the OSD option and press "Enter" to execute the All Key lock function.
• The "OSD Locked" message will be displayed in the middle of the screen.
• LED lights will be changed from Blue Light to orange light.
• Press any Key screen to prompt "OSD Locked" message.
OSD Unlocked:
• In normal display condition to press the "Navi Key" in the middle of more than 3 seconds to trigger "OSD Unlock".
• The "OSD Unlock" message will be displayed in the middle of the screen.
• LED lights will be restored to Blue Light.
System
Game Assistant
Information
Audio
Gaming
System
Input
Auto Source
Wide Mode
Hot Key Assignment
DDC/CI
HDMI Black Level
Quick Start Mode
USB Port Select
USB 3.2
Standard
Mode
2560X1440
Resolution
60
Hz
HDMI 1
Input
Off
FreeSync Premium
Move Enter Exit
Picture
Color
OSD
Game Assistant
OSD
Information
Audio
Color
Picture
Gaming
System
DSC Off
On
Image Retention Refresh
Power-Off
USB Charge
Standard
Mode
2560X1440
Resolution
60
Hz
HDMI 1
Input
Off
FreeSync Premium
Move Enter Back
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select System from the OSD.Then toggle to the right to to the function you wish to adjust
and press the joystick to enter it.
3. Toggle to the up or down to control functions.
4. The System menu can be used to adjust the Input, Auto Source, Wide Mode,, Hot Key Assignment, DDC/CI, HDMI Black Level,
Quick Start Mode, USB Port Select, USB 3.2, DSC, Power-off USB Charge,Image Retention Refresh.
5. Input: Select the source from HDMI1(2.0), HDMI2(2.0), DP, DP ALT.
6. Auto Source: The default is “On”, which can support auto search for signal source in order.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note:
Surround application must set Auto Source is “Off”.
7. Wide mode: You can select which screen aspect you are using. The options are Full, Aspect, 1:1 and 21:9.
8. Hot Key Assigment: Select the function of shortcut key 1 or shortcut key 2(Modes,Brightness,Volume,Gamma,Contrast,Low Blue
Light,USB Port Select)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note:
Hot Key 1 and Hot Key 2 can't repeat the same function.