Acer Predator X27U bmiipruzx 27" 1440p HDR 240 Hz Gaming Monitor - Manual (Page 17)

X27U User Guide English 6
Connecting the cables
To install the monitor on your host system, please follow the steps below:
1. Turn off your computer and unplug your computer’s power cord.
2. Connect the signal cable to the DP (optional) and/or HDMI
(optional) input socket of the monitor, and the DP (optional) and/or HDMI
(optional) output socket of the graphics card on the computer.
3. Connect the USB Cable (Optional)
Connect the USB 3.2 cable to port.
4. Connect the Type C Cable (Optional)
Connect the Type C Cable to port for fast charge.
5. Insert the monitor power cable into the power port at the back of the monitor.
6. Connect the power adapter and power cord to the monitor, then to a properly
grounded AC outlet.
7. Connecting HDMI/DP+USB-B to computer 1 and USB-C to computer 2 when
Control up to 2 computers from a single set of keyboard and mouse connected
to the monitor.
DP
USB Type C
USB
USB Type A
5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/4.5A
5V/1.0A 5V/1.0A
Note:
• Audio output is only for audio output model. Please check user manual for more
instruction.
• Charging USB devices just in DC on mode.