Eagle Electronics FishElite - Manual (Page 76)

68
At left, the Sonar Page menu with the Log Sonar Chart Data command
selected. At right, Sonar Chart Logging menu, with the Start Logging
command selected. The menu says the MMC has 34.2 MB of free space,
which will record the scrolling chart for 44 minutes and 59 seconds.
To record or log chart data:
1. Press
MENU |
↓ to
L OG S ONAR C HART D ATA
| ENT .
2. To record data using the default settings, press ENT . The menu clears
and the Sonar Page title bar shows the name of the file you are record-
ing. Warning messages will appear as recording time begins to run out.
NOTE:
You can change any of the settings by using the cursor arrows to
highlight different commands. Select
F ILE N AME
if you want to
change the name. Select C
HART
Q
UALITY
if you want to lower the file
quality and record for a longer period of time. After you've changed
the settings, select
S
TART
L
OGGING
and press ENT .
Noise Rejection
See the entry on Advanced Signal Processing in this section.
Overlay Data
On any Page display except Satellite Status, you can "float" or overlay
additional GPS or navigation data on the screen with the Overlay Data
command. For example, if you left your watch at home, you could dis-
play the local time on top of the map. Or, if you wanted to see details
about your route and trip, you could show your bearing, course, average
speed and trip distance.