Eagle Electronics FishElite - Manual (Page 178)

170
In search results, the distance and bearing to the selected item will be
calculated from the current position. In the case of a cursor search, the
search results show distance and bearing from the cursor, but an indi-
vidual waypoint's information screen shows distance and bearing from
Address search result list, left. At center, Map Page showing location
of the address on the map, highlighted by cursor. At right, after the
address is located, you can navigate to it ("D" symbol for destination).
Find Addresses
1. From the Map Page, press MENU |
↓ to
F
IND
A
DDRESS
| ENT .
2. Press ENT to search in the Address field.
3. To enter an address number, press
↑ or ↓ to change the first number,
then press
→ to move the cursor to the next number and repeat until
the number is correct, then press ENT .
Find Address Menu.
4. To enter a street name, press
↓ to
S
TREET
| ENT . There are two options:
A. You can spell out the name in the top selection box. Press
↑ or ↓ to
change the first letter, then press
→ to move the cursor to the next let-
ter and repeat until the name is correct, then press ENT | ENT . B. Jump
down to the lower selection list by pressing ENT , then press
↓ or ↑ to
select a street name from the list, then press ENT . The street name you
selected is now in the street field.