Eagle Electronics FishElite - Manual (Page 71)

63
At left, Sonar Page menu with Depth Range command selected. At
right, the Depth Range Control Scale.
2. The Depth Range Control Scale appears. Press
↑ or ↓ to select a dif-
ferent depth range. A blue bar highlights the selected range. Range
numbers in light blue cannot be selected.
3. When the new range is selected, press EXIT to clear the menu.
Depth Range - Manual
You have complete control over the range when the unit is in the man-
ual mode. There are 16 depth ranges, from 5 feet to 4,000 feet.
To switch to Manual Depth Range:
1. First, turn off automatic depth range. From the Sonar Page, press
MENU |
↓ to
A
UTO
D
EPTH
R
ANGE
| ENT .
2. Press
↑ to
D
EPTH
R
ANGE
| ENT and the Depth Range Control Scale appears.
3. Press
↓ or ↑ to select a different depth range. A horizontal blue bar
highlights the selected range.
4. When the new range is selected, press EXIT to clear the menu.
To turn Auto Depth Range on again:
From the Sonar Page, press MENU |
↓ to
A UTO D EPTH R ANGE
| ENT | EXIT .
NOTE:
The sonar's depth capability depends on the transducer installa-
tion, water and bottom conditions, and other factors.
FasTrack

This feature automatically converts all echoes to short horizontal lines
on the display's far right side. The graph on the rest of the screen con-
tinues to operate normally. FasTrack gives you a rapid update of condi-