Epson PowerLite X49 3600-Lumen XGA 3LCD Projector - Manual (Page 200)

200
• If the access point security is WPA3-EAP, change the access point setting to WPA2/WPA3-EAP .
Note: EAP and PEAP security are only available on PowerLite 992F/1288.
Parent topic: Solving Network Problems
Related references
Projector Network Settings - Network Menu
Event ID Code List
Related tasks
Selecting Wireless Network Settings Manually
Solutions When You Cannot Access the Projector Through the Web
If you are unable to access the projector through a web browser, make sure you are using the correct ID
and password, which are case sensitive.
Note: You cannot change the user ID.
• You may need to log in to access some options on the Web Control screen. If you see a log in window,
enter EPSONWEB as the user ID and enter the password set in the projector's Network menu as the
password. The default password is admin .
• To display the Web Remote screen, enter EPSONREMOTE as the user ID and enter the password
set in the projector's Network menu as the password. The default password is guest .
• Avoid connecting via a proxy server.
• Make sure you have access to the network the projector is on.
• If you set the Standby Mode setting to Communication On in the projector's ECO menu, make sure
the network device is turned on. After turning on the network device, turn on the projector.
Note: The user ID and password are case sensitive.
Parent topic: Solving Network Problems