Solutions to sound problems – Epson PowerLite X49 3600-Lumen XGA 3LCD Projector User Manual
Page 195
195
• Adjust the available settings on the Image menu for the current input source, such as
Brightness
,
Contrast
,
Tint
, and/or
Color Saturation
.
• Make sure you selected the correct
Video Range
or
Video Signal
setting on the Signal menu, if
available for your image source.
• Make sure all the cables are securely connected to the projector and your video device. If you
connected long cables, try connecting shorter cables.
• If you are using the
ECO
Power Consumption setting, try selecting
High
in the projector's menus.
Note:
At high altitudes or locations subject to high temperatures, the image may become darker and
you may not be able to adjust the Power Consumption setting.
• Position the projector close enough to the screen.
• If the image has been progressively darkening, you may need to replace the projector lamp soon.
• If the above solutions do not correct your image, try resetting all of the projector's settings using the
Reset menu.
Parent topic:
Solving Image or Sound Problems
Related concepts
Related references
Image Quality Settings - Image Menu
Input Signal Settings - Signal Menu
Projector Setup Settings - ECO Menu
Solutions to Sound Problems
If there is no sound when you expect it or the volume is too low or high, try the following solutions:
• Adjust the projector's volume settings.
• Press the
A/V Mute
button on the remote control to resume video and audio if they were temporarily
stopped.
• Check your computer or video source to make sure the volume is turned up and the audio output is set
for the correct source.
• Try disconnecting and reconnecting the audio cable.
• Check the audio cable connections between the projector and your video source.