Epson PowerLite X49 3600-Lumen XGA 3LCD Projector User Manual
Page 132

132
3.
Make sure all projectors are using the same
Color Mode
setting.
4.
Set the remote control ID to match the first projector.
5.
Press the
Menu
button, select the
Image
menu, and press
Enter
.
6.
Select settings as necessary.
7.
Set the remote control ID to match the next projector, then select Image menu adjustments as
necessary to match the projectors' displays.
Note:
The brightness and tint may not match exactly even after adjustments. If brightness and tint
differences become more noticeable over time, repeat the adjustments.
Parent topic:
Projector Identification System for Multiple Projector Control
Related concepts
This manual is related to the following products: