Solutions when the image is fuzzy or blurry – Epson PowerLite X49 3600-Lumen XGA 3LCD Projector User Manual

Page 194

194

Solutions When the Image is Fuzzy or Blurry

If the projected image is fuzzy or blurry, try the following solutions:

• Adjust the image focus.

• Clean the projector lens.

Note:

To avoid condensation on the lens after bringing the projector in from a cold environment, let the

projector warm up to room temperature before using it.

• Position the projector close enough to the screen.

• Position the projector so the keystone adjustment angle is not so wide that it distorts the image.

• Turn on automatic keystone adjustment in the Settings menu (if available for your product).

• Adjust the

Sharpness

setting in the Image menu to improve image quality.

• If you are projecting from a computer, press the

Auto

button on the remote control to automatically

adjust the tracking and sync. If any bands or overall blurriness remain, display a uniformly patterned
image on the screen and manually adjust the

Tracking

and

Sync

settings in the Signal menu.

• If you are projecting from a computer, try using a lower resolution or try to match the projector's native

resolution.

Parent topic:

Solving Image or Sound Problems

Related concepts

Projector Placement

Related references

Solutions When the Image Brightness or Colors are Incorrect

If the projected image is too dark or light, or the colors are incorrect, try the following solutions:

• Press the

Color Mode

button on the remote control to try different color modes for the image and

environment.

• Check your video source settings.

This manual is related to the following products: