Epson Pro L30002UNL 30,000-Lumen HDR Pixel-Shift DCI 4K Laser 3LCD Large Venue Projector (White) User Manual
Epson Projectors
Table of contents
Document Outline
- Contents
- Introduction to Your Projector
- Setting Up the Projector
- Projector Placement
- Projector Connections
- Attaching and Removing a Lens
- Securing the Power Cord
- Attaching and Removing the HDMI Cable Clip
- Installing Batteries in the Remote Control
- Using the Projector on a Network
- Wired Network Projection
- Wireless Network Projection
- Setting Up Projector Network E-Mail Alerts
- Selecting Other Network Settings
- Setting a Static IP Address on the LCD Screen
- Controlling a Networked Projector Using a Web Browser
- Using Crestron Connected
- Art-Net Channel Definitions
- Registering a Digital Certificate on the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Selecting the Language for the Projector Menus
- Resizing the Image with the Zoom Button
- Focusing the Image Using the Focus Buttons
- Setting the Screen Type
- Adjusting the Image Position Using Lens Shift
- Adjusting the Image Position Using Screen Position
- Displaying a Test Pattern
- Image Shape
- Selecting an Image Source
- Remote Control Operation
- Projection Modes
- Image Aspect Ratio
- Color Mode
- Adjusting the Brightness
- Adjusting Luminance Controls
- Adjusting Gamma
- Setting the Date and Time
- Adjusting Projector Features
- Shutting Off the Picture Temporarily
- Stopping Video Action Temporarily
- Projector Security Features
- Projecting Two Images Simultaneously
- Using Advanced Image Adjustment Features
- Using Multiple Projectors
- Multiple Projector Adjustment Overview
- Projector Identification System for Multiple Projector Control
- Tiling Images into One Image
- Blending the Image Edges
- Adjusting the Black Level
- Matching Tint and Brightness (Screen Matching)
- Scaling an Image
- Tiling Images Using Geometry Correction Assist
- Stacking Images Using Geometry Correction Assist
- Simple Stacking for One Bright Image
- Saving Settings to Memory and Using Saved Settings
- Saving a Scheduled Event
- Copying Menu Settings Between Projectors
- Adjusting the Menu Settings
- Using the Projector's Menus
- Image Quality Settings - Image Menu
- Input Signal Settings - Signal Menu
- Projector Feature Settings - Settings Menu
- Projector Setup Settings - Extended Menu
- Projector Network and Camera Settings - Network Menu
- Projector Information Display - Info Menu
- Projector Reset Options - Reset Menu
- Maintaining and Transporting the Projector
- Solving Problems
- Projection Problem Tips
- Projector Light Status
- Viewing Projector Status Information
- Using the Projector Help Displays
- Solving Image Problems
- Solutions When No Image Appears
- Solutions When "No Signal" Message Appears
- Solutions When "Not Supported" Message Appears
- Solutions When Only a Partial Image Appears
- Solutions When the Image is Not Rectangular
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions When Automatic Adjustments are not Applied Correctly
- Solutions When an Afterimage Remains On the Projected Image
- Solving Projector or Remote Control Operation Problems
- Solving Network Problems
- Where to Get Help (U.S. and Canada)
- Technical Specifications
- Notices