Turning off the projector – Epson Pro L30002UNL 30,000-Lumen HDR Pixel-Shift DCI 4K Laser 3LCD Large Venue Projector (White) User Manual
Page 124
124
If you do not see a projected image right away, try the following:
• Make sure the lens cap is off.
• Turn on the connected computer or video device.
• Insert a DVD or other video media and press the play button, if necessary.
• Press the
Search
button on the remote control to detect the video source, or press one of the source
buttons on the remote control or projector.
Parent topic:
Using Basic Projector Features
Related references
Projector Setup Settings - Extended Menu
Related tasks
Turning Off the Projector
Before turning off the projector, shut down any computer connected to it so you can see the computer
display during shutdown.
Note:
Turn off this product when not in use to prolong the life of the projector. Laser life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
Note:
When using the Shutter function, the laser is still on. To turn off the laser, turn off the projector.
1.
Press the
Standby
button on the projector or remote control.
The projector displays a shutdown confirmation screen.
Note:
If
Standby Confirmation
is disabled and you press the power button on the remote control,
the confirmation screen is not shown and the projector shuts off.