Epson Pro L30002UNL 30,000-Lumen HDR Pixel-Shift DCI 4K Laser 3LCD Large Venue Projector (White) User Manual

Page 200

200

Automatic light source calibration may not start in the following conditions:

• Within 20 minutes of turning on the projector.

• When using the Shutter feature or within 20 minutes of releasing the shutter.

• When using direct power shutdown.

• When you have used the projector continuously for over 24 hours.

Note:

To perform a light source calibration, the projector must have been on for at least 20 minutes and

the projector brightness must not be automatically dimmed due to high temperatures.

Press the

Menu

button.

Select the

Reset

menu and press

Enter

You see a screen like this:

Select

Light Source Calibration

and press

Enter

Select any of the following:

• To run the light source calibration now, select

Run Now

• To automatically run the light source calibration every 100 hours of projector usage, select

Run

Periodically

• To schedule automatic calibration, select

Schedule Settings