Cutting roll paper, Cutting roll paper manually – Epson SureColor T3170x 24" Desktop Printer User Manual
Page 58
58
Related tasks
Removing Roll Paper
Selecting Advanced Settings - Mac
Cutting Roll Paper
The printer has a built-in cutter that can automatically cut most paper types. When Auto Cut is turned on,
paper is automatically cut after each page prints, or if the roll paper leading edge is not straight.
To switch between automatic or manual cutting methods, adjust the
Auto Cut
settings in the printer
driver. The setting selected in the printer driver overrides the control panel setting.
Note:
The built-in cutter cannot cut roll paper segments that are shorter than 3.93 inches (100 mm). If
the length of roll paper in the eject slot is less than 3.93 inches (100 mm), additional paper is fed
automatically until that length is reached.
Parent topic:
Related references
Related tasks
Selecting Advanced Settings - Mac
Cutting Roll Paper Manually
You can keep your prints on the roll until you manually cut them.
1.
Turn off the
Auto Cut
setting in the printer driver or the control panel, depending on the situation:
• If you want to cut the paper manually, turn off the setting in the printer driver. Select
Advanced
>
Roll Paper Option
>
Auto Cut
.
Note:
The
Auto Cut
setting in the printer driver takes priority over the setting in the control panel.
The printer driver setting returns to automatic cutting when you close the application.
• If you are using a paper type that cannot be cut with the built-in cutter, turn off the setting in the
control panel. From the roll paper information area, select
Advanced Media Setting
>
Auto Cut
>
Off
.
2.
Print your document.