Using wps to connect to a network – Epson Expression Premium XP-6100 All-in-One Printer User Manual

Page 49

Text mode
Original mode

Note:

To check if your router is WPS-enabled, look for a button labeled

WPS

on your router or access

point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.

Using WPS to Connect to a Network

Parent topic:

Wi-Fi Networking

Using WPS to Connect to a Network

If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.

Press the

home button, if necessary.

Select the

icon.

You see a screen like this:

Select

Wi-Fi (Recommended)

Select

Start Setup

Change Settings

Select

Push Button Setup (WPS)

Follow the instructions on the LCD screen to complete WPS setup.

Note:

Make sure you press

Start Setup

within two minutes of activating WPS on your router.