Epson FastFoto FF-680W Photo Scanner - Manual (Page 21)

21
Determining the Scanner's IP Address
If you have multiple scanners on your network, you need to know the IP address of the scanner when
setting up network scanning.
1. Do one of the following to start EpsonNet Config:
• Windows 10 : Click > EpsonNet > EpsonNet Config .
• Windows 8.x : Navigate to the Apps screen and select EpsonNet Config .
• Windows (other versions) : Click or Start , and select All Programs or Programs . Select
EpsonNet > EpsonNet Config > EpsonNet Config .
• Mac : Open the Applications folder and select Epson Software > EpsonNet > EpsonNet Config
> EpsonNet Config .
2. Locate your scanner in the list and write down the IP address.
Parent topic: Setting Up Network Scanning
Epson DocumentScan App for iOS/Android
You can use the Epson DocumentScan app to scan from a network scanner to an iOS or Android device
over a direct Wi-Fi connection.
For more information about Epson DocumentScan, search for the app on the App Store (iOS) or Google
Play (Android).
Note: Epson DocumentScan only supports document scanning, not photo scanning.
Parent topic: Wi-Fi Networking
Disabling Wi-Fi Features
You may need to disable your product's Wi-Fi features if you change your network connection type or
need to solve a problem with your network connection.
Note: Before disabling Wi-Fi features, make a note of your product's SSID (network name) and
password, and any network settings selected for Epson DocumentScan.
Press and hold the Wi-Fi button on the scanner for at least three seconds to disable the Wi-Fi
features. When the Wi-Fi light and the AP mode light turn off, Wi-Fi is disabled.
Parent topic: Wi-Fi Networking