Setting up network scanning – Epson FastFoto FF-680W Photo Scanner User Manual

Page 19

Setting Up Network Scanning

You can set up network scanning to your scanner using the Epson Scan 2 Utility.

First manually configure your scanner to connect to your network. Then follow the instructions here to set
up your computer for network scanning using the Epson Scan 2 Utility. Your scanner must be turned on
and connected to the network.

Note:

Make a note of the IP address or host name of the scanner so you can enter it in these steps.

Do one of the following to start the Epson Scan 2 Utility:

•

Windows 10

: Click

EPSON

Epson Scan 2 Utility

•

Windows 8.x

: Navigate to the

Apps

screen and select

Epson Scan 2 Utility

•

Windows (other versions)

: Click

Start

All Programs

Programs

EPSON

Epson

Scan 2

Epson Scan 2 Utility

•

Mac

: Open the

Applications

folder, click

Epson Software

, and click

Epson Scan 2 Utility

Select

Settings

from the Scanner drop-down list.

You see a screen like this:

Note:

If you see an

Enable Editing

button (Windows) or a lock icon (Mac), click it so that you can

modify the scanner settings.