Sony E 55-210mm f/4.5-6.3 OSS Lens (Black) - Manual (Page 83)

Help Guide
Wireless Noise Canceling Stereo Headset
WF-1000XM5
Connecting to a paired Bluetooth device
Note
When connecting, [WF-1000XM5], [LE_WF-1000XM5], or both may be displayed on the connecting device. When both or [WF-
1000XM5] is displayed, select [WF-1000XM5]; when [LE_WF-1000XM5] is displayed, select [LE_WF-1000XM5].
If the last connected Bluetooth device is placed near the headset, the headset may automatically connect to the device when you
turn on the headset and may not connect to another device.
If this occurs, cancel the Bluetooth connection on the last connected device.
If you cannot connect your Bluetooth device to the headset, delete the headset pairing information on your Bluetooth device and
perform pairing again. As for the operations on your Bluetooth device, refer to the operating instructions supplied with the
Bluetooth device.
Related Topic
Wearing the headset
Using only one headset unit
How to make a wireless connection to Bluetooth devices
Lay the headset units on their sides and remove them from the charging case.
The headset turns on automatically.
1
Put the headset units into both ears.
When the headset has automatically connected to the last connected device, you will hear a notification sound
indicating that the connection is established from both headset units at the same time. When you wear only one
headset unit, you will hear the notification sound from the headset unit you are wearing.
Check the connection status on the Bluetooth device. If it is not connected, proceed to step
.
2
Make the Bluetooth connection from the Bluetooth device.
As for the operations on your Bluetooth device, refer to the operating instructions supplied with the Bluetooth
device.
You will hear a notification sound indicating that the connection is established from both headset units at the same
time. When you wear only one headset unit, you will hear the notification sound from the headset unit you are
wearing.
3
83