Sony E 55-210mm f/4.5-6.3 OSS Lens (Black) - Manual (Page 77)

Help Guide
Wireless Noise Canceling Stereo Headset
WF-1000XM5
Connecting to a paired computer (Mac)
Compatible OS
macOS (version 11 or later)
Before starting the operation, make sure of the following:
Depending on the computer you are using, the built-in Bluetooth adaptor may need to be turned on. If you do not
know how to turn on the Bluetooth adaptor or are unsure if your computer has a built-in Bluetooth adaptor, refer to
the operating instructions supplied with the computer.
Set the computer speaker to the ON mode.
If the computer speaker is set to the
“OFF” mode, no sound can be heard from the headset.
Computer speaker in the ON mode
Wake the computer up if the computer is in standby (sleep) or hibernation mode. 1
Lay the headset units on their sides and remove them from the charging case.
The headset turns on automatically.
2
Put the headset units into both ears.
When the headset has automatically connected to the last connected device, you will hear a notification sound
indicating that the connection is established from both headset units at the same time. When you wear only one
headset unit, you will hear the notification sound from the headset unit you are wearing.
Check the connection status on the computer. If it is not connected, proceed to step
.
3
Select the headset using the computer. 4
Select [ (System Preferences)] - [Bluetooth] from the Dock at the bottom of the screen. 1.
77