Sony LHP-1 Lens Hood - Manual (Page 98)

3. Camera Operations: Operations on the Home Screen of the Mini Display 98
Item Description
MPC-3626
Imager Mode Shooting frame rate
ProRes 4K / QFHD
4444
422 HQ
6K 17:9
5.7K 16:9 1 to 60 FPS 1 to 60, 66, 72 FPS
6K 2.39:1 1 to 60 FPS 1 to 60, 66, 72, 75 FPS
4K 6:5 1 to 60 FPS 1 to 60, 66, 72 FPS
4K 17:9
3.8K 16:9 1 to 60 FPS 1 to 60, 66, 72, 75, 88,
90 FPS
4K 17:9 Surround View
3.8K 16:9 Surround View 1 to 48 FPS 1 to 48 FPS
4K 2.39:1 1 to 60 FPS 1 to 60, 66, 72, 75, 88,
90 FPS
[Note]
Shooting frame rates of 7 or lower cannot be set in the following cases.
– When Base ISO is set to ISO 3200
– When Base ISO is set to ISO 2500 and the recording format is ProRes
Exposure Index Sets the EI value. The settings change as follows depending on the Project
> Basic Setting > Base ISO (page 72) setting in the full menu.
MPC-3628
Base ISO 800:
200EI/250EI/320EI/400EI/500EI/640EI/ 800EI /1000EI/1250EI/1600EI/
2000EI/2500EI/3200EI
Base ISO 3200:
800EI/1000EI/1250EI/1600EI/2000EI/2500EI/ 3200EI /4000EI/5000EI/
6400EI/8000EI/10000EI/12800EI
MPC-3626
ISO 500:
125EI/160EI/200EI/250EI/320EI/400EI/ 500EI /640EI/800EI/1000EI/
1250EI/1600EI/2000EI
ISO 2500:
640EI/800EI/1000EI/1250EI/1600EI/2000EI/ 2500EI /3200EI/4000EI/
5000EI/6400EI/8000EI/10000EI
Gain Sets the base sensitivity.
–6dB/–3dB/
0dB /3dB/6dB/9dB/12dB/15dB/18dB
[Note]
Configurable only when an RM-B170 or other remote control unit is connected and
Technical > Special Configuration > RM/RCP Paint Control (page 91) is set to On in
the full menu.
Item Description
Shutter Sets the electronic shutter angle/shutter speed.
Select from preset values registered as shutter steps.
[Note]
Not available when the electronic shutter operation is set to Continuous.
Displays the following selection options depending on the Technical >
System Configuration > Shutter Mode (page 87) setting in the full menu.
Angle (Δ): Shutter angle indicator
360.0/ 180.0 /172.8/144.0/90.0/45.0/22.5/11.2/5.6 1)
Speed (SS): Shutter speed indicator
1/24, 1/25, 1/30, 1/48, 1/50, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000,
1/2000
1)
ND Filter Sets the density of the ND filter. The following settings are available.
Clear /0.3/0.6/0.9/1.2/1.5/1.8/2.1/2.4
WB (White Balance) Sets the color temperature of the white balance.
Select from preset values registered as WB steps.
3200K+00 /4300K+00/5500K+00 1)
1) The selection options can be changed using Step Edit on the Home screen of the sub display.