Sony LHP-1 Lens Hood - Manual (Page 68)

3. Camera Operations: Shooting Menu 68
Shooting > Look
Makes settings related to Preset Look.
[Note]
Look is grayed out and the setting cannot be changed when Technical > Special Configuration > RM/RCP Paint
Control (page 91) is set to On in the full menu.
Menu item Setting Description
ASC CDL Process
Shooting > Look Project > Basic Setting >
Input Color Space ASC CDL Process
available options
Category Preset Look Select
Preset Look s709 S-Gamut3/Slog3
S-Gamut3.Cine/Slog3 CDL Off
Look -> CDL
CDL -> Look
R709(800%)
S-Gamut3/Slog3 S-Gamut3/Slog3
S-Gamut3.Cine/Slog3 CDL Off
Look -> CDL
S-Gamut3.Cine/
Slog3 S-Gamut3/Slog3 CDL Off
Look -> CDL
S-Gamut3.Cine/Slog3 CDL Off
Look -> CDL
ACESproxy
ACEScct
ACES 1.0
Output-Rec.709 ACEScct CDL Off
CDL On
User 3D
LUT – S-Gamut3/Slog3
S-Gamut3.Cine/Slog3 CDL Off
Look -> CDL
CDL -> Look
ART – S-Gamut3/Slog3
S-Gamut3.Cine/Slog3 CDL Off
Look -> CDL
CDL -> Look
ACEScct
with User
3D
ACESproxy
with User
3D – ACEScct CDL Off
CDL -> Look
ACES with
ART – ACEScct CDL Off
CDL -> Look
ASC CDL Select No File /Not Selected Selects the ASC CDL registered in the unit.
ASC CDL Information Displays information from the ASC CDL file
selected by ASC CDL Select.
You can change the Saturation setting on the
displayed screen.
Shooting > Look File
Loads a User 3D LUT file into the unit.
[Note]
Look File is grayed out and the setting cannot be changed when Technical > Special Configuration > RM/RCP Paint
Control (page 91) is set to On in the full menu.
Menu item Setting Description
Load User 3D LUT Loads a User 3D LUT file stored on an SD card
into the unit.
Reset User 3D LUT Resets a User 3D LUT data setting.
Reset All User 3D
LUTs Run/Cancel Resets all User 3D LUT data settings (execute
by selecting Run).
Load ART Loads an ART file stored on an SD card into
the unit.
Reset ART Resets an ART data setting.
Reset All ARTs Run/Cancel Resets all ART data settings (execute by
selecting Run).
Load ASC CDL Loads ASC CDL data from an SD card.
Reset ASC CDL Resets an ASC CDL data setting.
Reset All ASC CDLs Run/Cancel Resets all ASC CDL data settings (execute by
selecting Run).
Shooting > LUT Select
Makes settings related to the LUT to apply to the output image.
[Note]
The value of each menu item (excluding SDR Gain) varies depending on the Technical > Special Configuration > RM/
RCP Paint Control (page 91) setting in the full menu.
Menu item Setting Description
SDI 1/2 When RM/RCP Paint Control is
set to Off:
Log/ Look
Selects the LUT to apply to the SDI 1/2 output
image.
When RM/RCP Paint Control is
set to On:
Log/HLG(Natural)/
HLG(Live)/User Gamma
The SDI 1/2 output image setting is display
only, because it is determined by the Project >
Basic Setting > Input Color Space (page 72)
setting in the full menu.