Sony LHP-1 Lens Hood - Manual (Page 151)

8. Appendix: Specifications 151
DC output (12 V)
LEMO 2-pin (1),
11 V to 17 V DC (Output voltage:
Same as input voltage, Maximum
output current: 1.0 A),
22 V to 32 V DC (Output voltage:
16.8 V, Maximum output current:
1.0 A), Using battery adaptor
[Note]
Connect to the 12V OUT connector only devices with
current consumption of 1.0 A or lower.
DC output (24 V)
Fischer 3-pin (2),
11 V to 17 V DC (Output voltage:
24 V, Maximum output current:
1.0 A),
22 V to 32 V DC (Output voltage:
Same as input voltage, Maximum
output current: 2.0 A)
[Note]
Connect to the 24V OUT connector only devices with
current consumption of 1.0 A or lower when the input
voltage is 11 V to 17 V, or 2.0 A or lower when the input
voltage is 22 V to 32 V.
SDI output BNC type (4)
3G-SDI: SMPTE ST424/425
Level B-DL/DS
HD SDI: SMPTE ST292 compliant
AUX BNC type (1)
Viewfinder output
LEMO 26-pin (1)
Network RJ45 type (1)
Remote control
8-pin (1)
MONITOR output
BNC type (1)
HD SDI: SMPTE ST292 compliant
Timecode input
TC IN: BNC type (1)
GENLOCK input
BNC type (1)
HDMI output
Type A (1)
External device connector
USB host: Type A (1)
Headphones output
Stereo mini jack (1)
Speaker output
Monaural
Media Slots
Type AXS-A card (2)
SD card (1)
Supplied Accessories
VF attachment (1)
Handle (1)
VF cable (1) (A-2203-745-A)
Shim (circular) (1) (4-730-328-11)
Shim (1/3 arc) (15) (4-730-328-21)
E-mount lens cap (1)
PL-mount lens cap (1)
Cover for 6K imager block (1) (A-5040-737-A)
(MPC-3628 only)
Before Using This Unit (1)
Related Accessories
0.7-inch type viewfinder
DVF-EL200, DVF-L700
Camera Extension System
CBK-3610XS
Wireless LAN Adaptor
CBK-WA02
Remote Control Unit
RM-B170/B750
RCP-1000/1500/1530/3500
RCP-1001/1501/3100/3501
Card Reader
AXS-AR3
Shoulder Adaptor (attaches to VCT-14 using V
shoe)
VCT-FSA5
E-mount lens
SELP28135G, SEL1224GM, SEL1635GM,
SEL2470GM, SEL70200GM,
SEL100400GM, SEL24F14GM,
SEL35F14GM, SEL50F12GM,
SEL85F14GM, SEL100F28GM
Battery Pack
BP-GL95B
Microphone
ECM-680S, ECM-678*, ECM-674*
* EC-0.5X3F5M 3-pin XLR to 5-pin XLR
adaptor cable required
Dual Battery Adaptor
BKW-L200 (connection via battery
connection adaptor)
SDI/HDMI Monitor
BVM series, PVM series, LMD series
Design and specifications are subject to
change without notice.