Sony LHP-1 Lens Hood - Manual (Page 105)

4. Network: Network Setup and Operations 105
5
Use the button, button, or direct
touch to move the cursor to a load
destination number and then click/tap
the Select button.
6
Open a folder on the network-connected
device and select the file to load.
When the file is loaded successfully,
“Successfully loaded” is displayed.
Loading an ART file
You can load an ART file into the unit from a
network-connected device.
1
Click/tap the Edit Look button on the LUT
selection screen.
The Look selection screen appears.
2
Click/tap the Load File button.
A file type selection screen appears.
3
Move the cursor to Load ART File and
click/tap the Select button.
A load destination selection screen
appears.
4
Move the cursor to Web and click/tap the
Select button.
The load destination numbers (01 to 16)
are displayed.
A file name is displayed for loaded
numbers.
5
Use the button, button, or direct
touch to move the cursor to a load
destination number and then click/tap
the Select button.
6
Open a folder on the network-connected
device and select the file to load.
When the file is loaded successfully,
“Successfully loaded” is displayed.
Loading an ASC CDL file
You can load an ASC CDL file into the unit from
a network-connected device.
1
Click/tap the Edit Look button on the LUT
selection screen.
The Look selection screen appears.
2
Click/tap the Load File button.
A file type selection screen appears.
3
Move the cursor to Load ASC CDL File and
click/tap the Select button.
A load destination selection screen
appears.
4
Move the cursor to Web and click/tap the
Select button.
5
Open a folder on the network-connected
device and select the file to load.
When the file is loaded successfully,
“Successfully loaded” is displayed.