Sony LHP-1 Lens Hood - Manual (Page 49)

3. Camera Operations: User Functions Screen 49
Assignable Button
setting Function State after rebooting
SDI 1/2 Frame Line Turns superimposition of frame lines on the
SDI 1/2 output image on/off. Setting retained
SDI 3/4 Frame Line Turns superimposition of frame lines on the
SDI 3/4 output image on/off. Setting retained
SDI Overlay Turns display of information on the SDI output
image on/off. Setting retained
Press&Hold for SDI12
Log Disables the LUT applied to the SDI 1/2 output
image while the button is pressed, and sets
Log image quality without applying a LUT. Setting not retained
Press&Hold for SDI34
Log Disables the LUT applied to the SDI 3/4 output
image while the button is pressed, and sets
Log image quality without applying a LUT.
When the SDI 3/4 output and Monitor output
are linked, Press & Hold for Moni Log is also
enabled. Setting not retained
Monitor Frame Line Turns superimposition of frame lines on the
Monitor output image on/off. Setting retained
Monitor Overlay Turns display of information on the Monitor
output image on/off. Setting retained
Press & Hold for Moni
Log
4)
Disables the LUT applied to the Monitor
output image while the key is pressed for
normal image quality without applying a LUT.
When the SDI 3/4 output and Monitor output
are linked, Press&Hold for SDI34 Log is also
enabled.
When the HDMI output and Monitor output
are linked, HDMI output is also enabled. Setting not retained
Monitor Focus
Magnifier
2) 3)
Turns the focus magnifier function of the
Monitor output image on/off. Setting not retained
Monitor Highlight
Clip Ind
1)
Turns the function that displays clipped
highlight areas in red on the Monitor output
image on/off. Setting retained
Monitor False Color 1) Turns the false color function display on a
monitor on/off. Setting retained
Line A: Aspect Ratio
Disp. Turns the Aspect Ratio display for Line A on/
off. Setting retained
Line B: Aspect Ratio
Disp. Turns the Aspect Ratio display for Line B on/
off. Setting retained
Assignable Button
setting Function State after rebooting
Line A: User Frame
Disp. Turns the User Frame Line 1 and User Frame
Line 2 display for Line A on/off.
Each time the key is pressed, the display
switches between User Frame Line 1 and 2
display
 User Frame Line 1 display  User
Frame Line 2 display  User Frame Line 1 and
2 hidden.
Setting retained
Line B: User Frame
Disp. Turns the User Frame Line 1 and User Frame
Line 2 display for Line B on/off.
Each time the key is pressed, the display
switches between User Frame Line 1 and 2
display
 User Frame Line 1 display  User
Frame Line 2 display  User Frame Line 1 and
2 hidden.
Setting retained
H & V Flip 7) Flips the shooting mode image orientation. Setting retained
Anamorphic De-
Squeeze Changes the Project > Basic Setting > Anamo.
De-Squeeze setting in the full menu.
Each time the key is pressed, the setting
changes to the next item in the list of menu
selection options. Setting retained
Auto White Balance 5) Executes auto white balance. –
Color Bars 5) Turns color bars on/off. Setting retained
Picture Cache Rec Turns the picture cache recording function
on/off. Setting retained
AXS Slot Change Switches the active slot when two AXS
memory cards are inserted.
Switches between A and B each time the key
is pressed. Setting retained
Format Media AXS
Slot A Formats media in AXS slot A. –
Format Media AXS
Slot B Formats media in AXS slot B. –
Iris Open (1/16 stop) 6) Opens the lens iris.
Press and hold to open the iris until fully
open.
This function is available when an E-mount
lens with power iris is attached.
The setting is in 1/16 stop increments,
whereas the iris indication is in units of 1/3
stop increments. –