Sony MDR-MV1 Open-Back Reference Monitor Headphones - Manual (Page 57)

Press and hold the (Bluetooth) button for about 2 seconds to turn on the Bluetooth mode.
You will hear a notification sound indicating that the Bluetooth mode is turned on.
The
(Bluetooth) indicator (blue) lights up for about 2 seconds, and then flashes slowly.
When you pair the headset with a device for the first time after purchase, or after initializing the headset (if the
headset has no pairing information), the headset enters pairing mode automatically.
In this case, proceed to step
.
When you pair a second or subsequent device (the headset already has pairing information for other devices),
you need to operate manually to enter pairing mode.
In this case, proceed to step
-3.
2.
Press and hold the (Bluetooth) button for about 5 seconds to enter pairing mode.
You will hear a notification sound indicating that the headset enters pairing mode.
The
(Bluetooth) indicator (blue) repeatedly flashes twice in a row.
3.
Perform the pairing procedure on the Bluetooth device to search for this headset.
[INZONE H9 / INZONE H7] will be displayed on the list of detected devices on the screen of the Bluetooth device.
If it is not displayed, repeat from step
.
2
Select [INZONE H9 / INZONE H7] displayed on the screen of the Bluetooth device for pairing.
If Passkey (*) input is required, input “0000”.
3
A Passkey may be called “Passcode”, “PIN code”, “PIN number”, or “Password”. *
Make the Bluetooth connection from the Bluetooth device.
Some devices automatically connect with the headset when pairing is complete.
You will hear a notification sound indicating that the connection is established.
INZONE H9:
The left and right ring indicators (blue) change to a slow flashing.
4
57