Sony a7C Mirrorless Camera (Black) - Manual (Page 338)

Hint
Once the QR code has been read, this product's SSID (DIRECT-xxxx) and password are registered to the smartphone. This
enables you to easily connect the smartphone to the product via Wi-Fi at a later date by selecting the SSID. (Set [Ctrl w/
Smartphone] to [On] in advance.)
Note
Radio wave interference may occur as Bluetooth communications and Wi-Fi communications use the same frequency band. If
your Wi-Fi connection is unstable, it may be improved by turning off the Bluetooth function of the smartphone. If you do this, the
location information link function is not available.
If you cannot connect your smartphone to this product using the [One-touch(NFC)] function or QR code, use the SSID and
password.
Related Topic
PlayMemories Mobile
Controlling the camera using an Android smartphone (SSID)
4-732-947-11(1) Copyright 2018 Sony Corporation
Once the QR code has been read, a message [Connect with the camera?] will be displayed on the smartphone
screen.
Select [OK] on the smartphone screen.
The smartphone is connected to the product.
You can now shoot images remotely while checking the composition on the smartphone screen.
5
338