Steadyshot settings, Help guide – Sony a7C Mirrorless Camera (Black) User Manual

Page 200

Help Guide

Interchangeable Lens Digital Camera

ILCE-7M3

α7III

SteadyShot Settings

You can shoot with an appropriate SteadyShot setting for the attached lens.

Menu item details

Auto:
Performs the SteadyShot function automatically according to the information obtained from the attached lens.
Manual:
Performs the SteadyShot function according to the focal-length set using [SteadyS. Focal Len.]. (8mm-1000mm)

Check the focal-length index (A) and set the focal-length.

Note

The SteadyShot function may not work optimally when the power has just been turned on, right after you point the camera
towards a subject, or when the shutter button has been pressed all the way down without stopping halfway.

When using a tripod, etc., make sure to turn off the SteadyShot function because this can cause any malfunction when shooting.

[SteadyShot Settings] will be unavailable when MENU→

(Camera Settings2)→[SteadyShot] is set to [Off].

When the camera cannot obtain focal length information from the lens, the SteadyShot function does not work correctly. Set
[SteadyShot Adjust.] to [Manual] and set [SteadyS. Focal Len.] to match the lens you are using. The current set value of the
SteadyShot focal length will display to the side of

When using an SEL16F28 lens (sold separately) with a teleconverter, etc., set [SteadyShot Adjust.] to [Manual] and set the focal
length.

When you set [SteadyShot] to [On]/[Off], the SteadyShot settings of the camera and lens switch at the same time.

If a lens equipped with a SteadyShot switch is attached, the settings can only be changed using that switch on the lens. You
cannot switch the settings using the camera.