Epson 54c - Manual (Page 60)

60 Fine-tuning the Projector
3. To enable your screen logo, select User’s Logo Protect and press
Enter . Select ON and press Enter .
When this feature is on the logo appears whenever the projector is
turned on (if the Startup Screen is enabled) and as the A/V Mute
screen (if you enabled the logo for the
Background Color
setting). None of the User’s Logo features can be changed when
the User’s Logo Protect function is enabled.
4. Press Menu to close the Password Protect menu.
If you lose the remote control, you will not be able to enter the
password; so keep the remote control in a safe place at all times. You
can store it in the compartment under the projector. See “Storing the
Remote Control” on page 40.
When the period defined in the Time-elapsed setting has passed, and
the password is entered correctly, the elapsed time will be reset to
0
and the countdown will start again. So remember to disable or change
this setting when you need to.
Starting the Projector with a Password
When the password function is enabled, you see this screen when you
turn on the projector:
Use the numeric keypad buttons to enter the password that has been
set. Once you have entered the password correctly, the password
screen closes, and projection begins.