Roland V-1SDI 4-Channel HD Video Switcher - Manual (Page 6)

6
Panel Descriptions
Top Panel/Front Panel
[PinP] and [SPLIT] Buttons
These turn PinP, split, and other video compositing
on and off. When turned on, the [PinP] or [SPLIT]
button lights up.
[CONTROL 1] and [CONTROL 2] Knobs
When the [PinP], [SPLIT], or [KEY LEVEL] button is on
(lighted), these adjust the compositing effect.
p. 21, 26 p. 22
p. 22
p. 17 HDCP Indicator
This lights up, flashes, or goes dark according to
HDCP (digital content protection) settings and the
connection status of HDCP-compatible equipment.
[OUTPUT FADE] Knob
This performs a fade-in or fade-out for the main
output video, and adjusts the volume level for
output audio.
5 The indicators on the left and right of the
[OUTPUT FADE] knob show the status of the fade.
Flashing Fade-in/fade-out in progress
Dark Normal output
p. 12 [SETUP] Button
Pressing and holding the [SETUP] button (for 2
seconds or longer) to turn it on (lighted) displays
the SETUP menu on the monitor connected to the
MULTI-VIEW connector.
5 SETUP Indicator
This lights up on operation of a button or knob
for which panel lock (p. 30) is in effect.
p. 12, 26 [AUDIO] Button
Pressing and holding the [AUDIO] button (for 2
seconds or longer) to turn it on (lighted) displays
the AUDIO menu on the monitor connected to the
MULTI-VIEW connector.
5 AUDIO Indicator
This indicates the audio input or output level.
p. 13 [MEMORY] Button
The memory function is turned on (lighted) while
the [MEMORY] button is held depressed. You
can save and recall up to eight types of settings,
including video and audio settings and operation-
panel states.
When the memory function is on, the [A-1] through
[A-4] and [B-1] through [B-4] buttons function as
memory selection buttons 1 through 8.
p. 20, 21 [FREEZE] Button
5 This stops (freezes) input video. The [FREEZE]
button lights up during a freeze.
5 It outputs a captured still image.
5 It also outputs a still image transmitted from
V-1SDI RCS dedicated software.