Roland V-60HD Multi-Format HD Video Switcher and UVC-01 USB Video Capture Kit - Manual (Page 28)

28
Audio Operations
Applying Effects to Output Audio
This applies effects and adjusts the sound quality for master out and AUX-bus audio.
* Only the limiter can be used on AUX-bus audio (p. 26).
1.
Select the [MENU] button 0 “AUDIO OUTPUT” 0 “MASTER
OUT” or “AUX.”
2.
Select an effect menu item, then use the [VALUE] knob to
adjust it.
* For more information about effects, refer to the following
section.
3.
Press the [VALUE] knob to apply the setting.
4.
Press the [MENU] button to quit the menu.
Delay (DELAY)
This outputs audio with a delay.
Delaying audio output lets you align the output timing of video
and audio.
Menu item Explanation
DELAY This adjusts the delay time for output audio.
Equalizer (EQ)
This adjusts the sound quality for each frequency band.
Menu item Explanation
EQ Hi This boosts or attenuates the high band.
EQ Hi FREQ
This adjusts the center frequency when changing
the sound quality in the high band.
EQ Mid This boosts or attenuates the middle band.
EQ Mid FREQ
This adjusts the center frequency when changing
the sound quality in the middle band.
EQ Mid Q
This adjusts the width of the frequency band
when boosting or attenuating the middle band.
EQ Lo This boosts or attenuates the low band.
EQ Lo FREQ
This adjusts the center frequency when changing
the sound quality in the low band.
Multi-band compressor (MULTI BAND COMP)
* MASTER OUTPUT only
This applies separate compressors in individual frequency bands.
Menu item Explanation
MULTI BAND
COMP
This switches the multi-band compressor on and
off.
Hi THRESHOLD
Mid THRESHOLD
Lo THRESHOLD
These set the individual levels that become the
thresholds for the high, midrange, and low bands
at which the compressor is applied. Compression
is applied to audio that exceeds the threshold.
Hi RATIO
Mid RATIO
Lo RATIO These set the amount of compression applied in
the high, midrange, and low bands. The state in
which no compression is applied is defined as “1.”
Limiter (LIMITER)
This limits the output volume so that is does not exceed the set
level.
Menu item Explanation
LIMITER This sets the limiter on or off.
THRESHOLD
This sets the level that becomes the threshold at
which the limiter is applied.
Compression is applied to audio that exceeds the
threshold. The volume level of audio that is output
is limited so as to stay to below the threshold.
* AUX only
* MASTER OUTPUT only