Roland V-1HD+ Compact 4 x HDMI Video Switcher - Manual (Page 4)

4
Panel Descriptions
OUTPUT 1, 2 connectors
These output video. Connect projectors, displays, and
recording equipment.
* The menu of this unit is shown on the display that’s
connected to the OUTPUT 2 connector.
* For each connector, you can change the video bus (PGM,
PVW, MULTI-VIEW) that is assigned.
USB port
This port is used to remotely control this unit from
an external device.
DC IN jack
Connect the included AC adaptor to this jack.
* Use the cord hook to secure the
cord of the AC adaptor as shown in
the illustration.
Cord hook
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making
any connections.
Rear Panel (Connecting Your Equipment)
TALLY connector
This outputs a tally signal. Connect devices
provided with a tally-light feature.
[POWER] switch
Turns the power on/off.
USB MEMORY port
Connect a USB flash drive to this port. You use it
when importing still images or when saving or
loading settings for the unit.
Ground terminal
Connect this to an external earth or ground
if necessary.
RS-232 connector
You can connect this to a computer
equipped with an RS-232 connector, and
remotely control this unit.
AC adaptor
Power cord
To AC outlet
HDMI input connector