Attaching the pad to a stand, Connecting to a percussion sound module – Roland PD-85 - Dual-Zone 8" V-Pad for TD-Series Modules (Black) User Manual
Page 3
![background image](https://www.manualsdir.com/files/867744/content/doc003.png)
3
Attach the PD-85 to a stand (MDS series).
fig.Stand.e
When attaching the PD-85 to a tom stand, check the
dimensions of the rod. Depending on the dimensions of
the rod, it may not be possible to attach the pad to the
stand.
Acceptable rod diameters:
8.5–11.5 mm (3/8 to 1/2 inch)
Connecting to a percussion sound module.
When you have finished connecting to your percussion sound
module, refer to the owner’s manual supplied with the sound
module, and make the settings for it.
• To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn off
the power on all devices before making any connections.
• Use the included stereo cable to make connections.
Otherwise (if you use a monaural cable), you won’t be
able to employ rim shot and cross stick playing
techniques.
• Connect the L-shaped plug of the included cable to the
PD-85. This will prevent strain from being applied to the
PD-85.
Attaching the Pad to a Stand
Rod
Pass the rod through the pipe
that is inside the holder.
Tighten
Loosen
Connecting To A Percussion
Sound Module
Percussion
Sound Module
Rim Shot Capable
Trigger Inputs
TD-30, TD-20X,
TD-20
2 (SNARE)
3–6 (TOM 1–4)
12–15 (AUX 1–4)
TD-12
2 (SNARE)
3–5 (TOM 1–3)
11–12 (AUX 1–2)
TD-10
2 (SNARE)
TD-15, TD-11, TD-9
SNARE
TOM1–3
AUX
TD-8
3 (SNARE)
TD-6V, TD-6
2 (SNARE)
TD-3
SNARE
PD-85_e.fm 3 ページ 2021年7月8日 木曜日 午後5時9分