Ericsson R250s Pro User Manual

Page 69

ile

Security for Your Phone and Subscription

Changing Your PIN2 Code

Depending on the network you use, some services require that you enter a sec-

ond PIN, the PIN2.

1. Scroll to

Access

Y E S

Change PIN2

Y E S

2. Follow the same procedure as described in “Changing your PIN Code”

above.

Turning On the SIM Card Lock

1. Scroll to

Access

Y E S

Lock Card

Y E S

2. Enter your PIN code and press

Y E S

The message

Locked

confirms that the card lock is now on.

Cancelling the SIM Card Lock

1. Scroll to

Access

Y E S

Unlock Card

Y E S

2. Enter your PIN code and press

Y E S

The message

Unlocked

confirms that the card lock is now off.

Note! This function only applies if your SIM card allows you to turn off the

card lock.

The phone lock protects the phone against unauthorized use if it is stolen and

the SIM card exchanged. The Phone lock is not on when you buy the phone.

The default security code is 0000. You can change this code to any three- to

eight-digit code of your own choice.

The phone lock has two levels: Full lock and Autolock:

Full Lock

If the Full Lock is on, you briefly see the message Phone locked each time

you turn on the phone. The message is followed by the prompt Enter lock

code. You then have to enter a security code and press

Y E S

to be able to use

your phone.

Autolock

If the Autolock is on, the message Phone locked and the prompt Enter lock

code do not appear until a different SIM card is inserted in the phone. After

the security code has been entered correctly, the phone can be used with a new

SIM card. You are not asked to enter the security code until the original SIM

card or a different SIM card is inserted.

To change the security code

1. Scroll to

Access

Y E S

Phone lock Change code,

Y E S

2. Enter your old code and press

Y E S

PHONE LOCK

ACCESS

Phone lock

Change code