Ericsson R250s Pro User Manual

Page 51

ile

Personalizing Your Phone

close to your ear during a conversation as it may cause damage to your hear-

ing. For more information, see “Speakerphone” on page 26.

You can set the ring signal level in seven steps. The first step means that two

clicks are heard when you receive a call. The last step means that the phone

rings with an increasing ring signal.You can also turn the ring signal off. The

Ring level setting allows you to specify the level:

•

when the phone is handheld.

•

when the phone is connected to handsfree equipment.

To set the ring signal level

1. Scroll to

Ring level

Y E S

Buzzer

Y E S

2. Use the

L E F T

and

R I G H T

key to set the ring signal level.

•

Pressing

R I G H T

increases the volume.

•

Pressing

L E F T

decreases the volume.

The phone rings once with the actual setting as you increase the vol-

ume, except for the Off and Step settings.

3. Press

Y E S

to save the setting.

Tip! Use the side keys to change the ring level silently.

If you turn the Vibrating call alert on the phone vibrates when you receive a

call or a text message. This is useful when you e.g. are working in a noisy

environment and cannot hear the phone ringing.

To turn the vibrating call alert on or off

1. Scroll to

Ring level

Y E S

Vibrator

Y E S

2. Select

Off

and press

Y E S

Note! You can choose to have both the buzzer and the vibrating call alert on

at the same time.

You can choose a ring type from a list of different sounds and melodies. You

can also compose your own melody by entering notes with the keypad (see

“Composing your own melody” below).

To choose one of the ring signal types

1. Scroll to

Settings

Y E S

Ring type

Y E S

The current ring signal type is displayed.

2. Select the ring signal type you want and press

Y E S

RING SIGNAL VOLUME

VIBRATING CALL ALERT

RING SIGNAL TYPE

RING LEVEL

Buzzer

LQQQQqqqR

RING LEVEL

Vibrator

(Off)

RING TYPE

Phone

(Medium)