Ericsson R250s Pro User Manual

Page 13

ile

Preparing Your Phone for Use

Removing the Battery

Switching Antennas

The R250s PRO comes with two antennas. The longer antenna gives you bet-

ter receiving signalling when you are within an area with poor radio coverage.

Please make sure that you switch antennas during dry conditions, to prevent

leakage into the phone.

Note! Do not use any antennas designed for other type of telephone. The

antenna is specially designed for the R250s PRO. With the antenna (and bat-

tery) properly attached the phone is water resistant. Using other antennas will

void the warranty.

3. Lift the battery up and away from

the phone.

1. Turn off the phone.
2. Press the battery release catch on

the top of the battery.

3. Attach the new antenna, screwing

it clockwise until it is properly
attached.

4. Insert the rubber plug into the

external antenna connector.

1. Pull out the rubber plug from the

external antenna connector.

2. Screw the antenna anti-clockwise

to remove it.