EVGA nForce 122-CK-NF68-XX - Manual (Page 83)

Installing and Configuring the EVGA nForce 680i SLI Motherboard
32
‰ System Monitor
Use this menu to monitor the real-time system status of your PC, including
temperature, voltages, and fan speed.
The following items on the CMOS Setup Utility main menu are commands
rather than submenus:
‰ Load Defaults
Use this command to load the NVIDIA LinkBoost technology settings for
LinkBoost-enabled systems. Load default system settings for standard
systems.
‰ Set Password
Use this command to set, change, and disable the password used to access
the BIOS menu.
‰ Save & Exit Setup
Use this command to save settings to CMOS and exit setup.
‰ Exit Without Saving
Use this command to abandon all setting changes and exit setup.
The following two items on the CMOS Setup Utility main menu are status
indicators:
‰ NVIDIA LinkBoost (Status indication at bottom of screen)
This status indicator is displayed at the bottom of the BIOS screen and
consists of the following remarks:
¾ Detected: System detects LinkBoost-capable components.
¾ Not Detected: The LinkBoost components are not detected.
‰ SLI-Ready Memory (Status indication at bottom of screen)
This status indicator is displayed at the bottom of the BIOS screen and
consists of the following remarks:
¾ Enabled: SLI-Ready memory is detected and enabled.
¾ Disabled: SLI-Ready memory is detected but disabled.
¾ Not Detected: SLI-Ready memory is not detected.