System fans – EVGA nForce 122-CK-NF68-XX User Manual
Page 19
Installing and Configuring the EVGA nForce 680i SLI Motherboard
xviii
In this section of the Adjust Motherboard Settings you must understand what
you are changing. Overvoltaging any of the components can result in damage to
the components. From this menu, you can adjust the following voltages:
CPU
Memory
FSB
HyperTransport SSP MCP
nForce SPP
nForce MCP
Auxiliary
Always note the color of the indicator square to the right of each slider. Green
indicates the voltage is within range and will not damage any components.
Yellow means to proceed with caution; you are no longer in the safe range. If
the indicator square is red, you are possible overvoltaging the component and
could be causing damage.
System Fans
This section of the Adjust Motherboard Settings menu allows you to control the
CPU, System, nForce, MCP, and the auxiliary fans. You can either set all the
fans to automatic control or you can manually control each fan.
When in manual control, you can specify to show the temperatures in Celsius or
Fahrenheit.