Roland VC-1-DL Bi-Directional SDI/HDMI Video Converter with Delay and Frame Sync - Manual (Page 4)

4
WARNING
007
Do not place in an unstable
location
• Make sure you always have the
unit placed so it is level and sure
to remain stable. Never place it on
stands that could wobble, or on
inclined surfaces.
008c
Use only the supplied AC adaptor
and the correct voltage
• Be sure to use only the AC
adaptor supplied with the unit.
Also, make sure the line voltage
at the installation matches the
input voltage specified on the AC
adaptor’s body. Other AC adaptors
may use a different polarity, or be
designed for a different voltage, so
their use could result in damage,
malfunction, or electric shock.
008e
Use only the supplied power cord
• Use only the attached power-supply
cord. Also, the supplied power cord
must not be used with any other
device.
009
Do not bend the power cord or
place heavy objects on it
• Do not excessively twist or bend the
power cord, nor place heavy objects
on it. Doing so can damage the cord,
producing severed elements and
short circuits. Damaged cords are
fire and shock hazards!
WARNING
010
Avoid extended use at high
volume
• This unit, either alone or in
combination with an amplifier
and headphones or speakers, may
be capable of producing sound
levels that could cause permanent
hearing loss. Do not operate for
a long period of time at a high
volume level, or at a level that is
uncomfortable. If you experience
any hearing loss or ringing in the
ears, you should immediately stop
using the unit, and consult an
audiologist.
011
Don’t allow foreign objects or
liquids to enter unit; never place
containers with liquid on unit
• Do not place containers containing
liquid (e.g., flower vases)on this
product. Never allow foreign objects
(e.g., flammable objects, coins,
wires) or liquids (e.g., water or juice)
to enter this product. Doing so may
cause short circuits, faulty operation,
or other malfunctions.
USING THE UNIT SAFELY