Roland VC-1-DL Bi-Directional SDI/HDMI Video Converter with Delay and Frame Sync - Manual (Page 15)

15
Names of Things and What They Do
Rear Panel
fig.rear-panel.eps
1 2 3 4
1. DC IN Connector and Indicator
Connect the included AC adapter. The indicator lights up when the VC-1-DL is
receiving power.
2. AUDIO OUT Connectors and Indicator
Connect bi-amp speakers or other audio output equipment.
3. HDMI OUT Connector and Indicator
Connect a TV monitor or other HDMI output equipment.
4. HDMI IN Connector and Indicator
Connect a video camera or other HDMI source equipment.
Side Panel
fig.side-panel.eps
1 2
1. Delay Dials
These set the amount of delay for video and audio. You can set the amount of delay
independently for video and audio, in a range of 0 to 9 fields (0 to 4.5 frames) for
each. Use a flathead screwdriver to turn the dials.
2. Mode Switches (MODE SW)
These set the VC-1-DL’s operation mode. Refer to “Setting the Operation Mode” (p.
23). Use a fine-pointed pen or similar object to change the setting of a switch.