Roland VC-1-DL Bi-Directional SDI/HDMI Video Converter with Delay and Frame Sync - Manual (Page 22)

22
Connecting External Equipment
Connecting Digital Output Equipment
Change the setting (p. 23) to output AES signals. When you are doing this, use
only the R-channel of AUDIO OUT connectors. The L-channel is invalid when the
setting is changed to output AES signals.
fig.AES-out-connection.eps
Connecting a Computer for Remote Control
Connect a computer for remote control to the USB port.
fig.PC-connection.eps
* Operating the VC-1-DL by remote control requires downloading dedicated software (VC-1
RCS) and installing it on a computer. You can download the dedicated software from the
following Roland website.
http://www.rolandsystemsgroup.net/
The VC-1 RCS enables you to make detailed settings that cannot be made using the unit’s
mode switches. The values of the settings are saved to the unit’s internal memory. You can use
such saved settings even when you are using the unit alone, without connecting a computer.