Roland RD-88 Digital Stage Piano - Manual (Page 22)

22
Using the Convenient Functions in Performances
Connecting a Computer (USB COMPUTER
Port)
MIDI and audio data can be transferred via the RD-88’s USB
COMPUTER port to and from your computer.
* For details on operating requirements and supported operating
systems, refer to the Roland website.
USB cable
Installing the USB Driver
In order to use the RD-88 connected with your computer, you
must install a driver on your computer.
1. From the product support page, download the
RD-88 Driver.
To obtain the latest USB driver, access the following URL and
download the driver for the model you’re using.
https://www.roland.com/support/
2. Install the driver as directed by the procedure given
on the download page.
USB Driver Settings
Here's how to specify the USB driver that is used when
connecting to a computer via the USB COMPUTER port.
* Changes to the USB driver settings take effect when you restart
the unit.
1. Press the [MENU] button.
2. Use the cursor [ ] [ ] buttons to select “SYSTEM,”
and then press the [ENTER] button.
3. Use the cursor [ ] [ ] buttons to select “GENERAL,”
and then press the [ENTER] button.
4. Use the cursor [ ] [ ] buttons to select “USB Driver,”
and use the [DEC] [INC] buttons to edit the value.
Parameter Value Explanation
USB Driver
GENERIC
Choose this when using the USB driver that was
provided with your computer.
* Only MIDI can be used.
VENDOR
Choose this when using the USB driver that you
downloaded from the Roland website.
5. Save the setting.
& “Saving the System Settings (System Write)” (p. 27)
6. Turn the RD-88’s power off and then on again.