Roland Web Presentation Dock - Manual (Page 8)

8
Configuring the Settings (UVC-02 Setup Tool)
Setting the Functions for the [TALK] Button
Click the [ BUTTON] tab to switch the page.
Menu
Value (bold text:
default value)
Explanation
TALK
MODE
This sets what the [TALK] button does.
TOGGLE TALK/MUTE
Lets you mute/unmute the audio
with each press of the button.
PUSH TO TALK
The mic audio is output only
while you press the button.
PUSH TO MUTE
The mic audio is muted only
while you press the button.
MIC ATT.
MODE
Reduces the distortion or clipping by attenuating the mic
sensitivity.
-20dB
Select this when the mic input
volume is loud.
0 dB
Inputs the mic sound without
reducing the level. Normally, you
should select this setting.
Configuring the Audio
Click the [AUDIO] tab to switch the page.
Menu
Value (bold text:
default value)
Explanation
ROUTING
This sets the output destination for the input signals of HDMI, AUX, MIC,
H.MIC, USB IN, SFX1 and SFX2 respectively.
To
USB OUT
ON, OFF
Sets whether to output each
input signal via USB OUT.
To
MONITOR/
PHONES
ON, OFF
Sets whether to output each
input signal via MONITOR and
PHONES.
MEMO
You can use a template to select settings that are most suitable for
each situation.
1 Click the [TEMPLATE] button.
The unit switches to the settings for each template.
Template Explanation
WEB
PRESENTATION
Settings for Web presentations.
WEB MEETING
Settings for Web meetings.
The audio from the mic is not
outputted to MONITOR OUT or
PHONES OUT.
USB LOOPBACK
The audio from the USB input is
looped back to the USB output.
This is useful for application aside
from Web meetings, such as music
production.