Sharp MX-6070N - Manual (Page 22)

22
General Problems
PREVIEW IMAGES OR THUMBNAIL IMAGES DO
NOT APPEAR
Check Solution
Are there a number of jobs waiting to
be executed? ■ Wait until several of the jobs have been executed.
THE TOUCH PANEL DISPLAY IS DIFFICULT TO
VIEW
Check Solution
Is the brightness properly adjusted? ■ Tap the [LCD Control] key ( ) on the home screen to adjust the brightness.
YOU WERE LOGGED OUT WITHOUT LOGGING
OUT YOURSELF
Check Solution
Did Auto Clear activate? ■ When user authentication is used, the currently logged in user will be
automatically logged out if Auto Clear activates. Log in again.
If you are the administrator, change the time setting of Auto Clear or disable Auto
Clear in [Auto Clear Setting].
⇒ "Settings (administrator)" → [System Settings] → [Common Settings] →
[Operation Settings] → [Condition Settings] → [Auto Clear Setting]
I DON'T KNOW WHERE THE IP ADDRESS SETTING IS
Check Solution
The IP address is set in the Network
Settings of Setting mode. ■ To set a permanent IP address, ask your network administrator for the IP address
assigned to the machine and other information necessary for the Network Settings.
⇒ "Settings (administrator)" → [System Settings] → [Network Settings]
→ [Protocol Settings]
?
!
?
!
?
!
?
!