ProSoft Technology 5201-MNET-ASCII - Manual (Page 35)

MNET ♦ ProLinx Gateway Modbus TCP/IP Protocol Configuration
Modbus TCP/IP Interface Module Driver Manual
ProSoft Technology, Inc. Page 35 of 78
September 1, 2010
2.8 Downloading a File from PC to the Module
1 Verify that your PC is connected to the gateway with a null-modem serial
cable connected to the serial port on your PC and the serial port on the
gateway
2 Open the P ROJECT menu, and then choose M ODULE .
3 On the M ODULE menu, choose D OWNLOAD . Wait while ProSoft Configuration
scans for communication ports on your PC. When the scan is complete, the
Download
dialog box opens.
4 Select the PORT to use for the download.
5 Click the D OWNLOAD button.
Note: If you change the IP Address, you must cycle power to the gateway for the change to take
effect.