ProSoft Technology MVI71-GEC - Manual (Page 72)

Reference MVI71-GEC ♦ PLC 5 Platform
User Manual Generic ASCII Ethernet Communication Module
Page 72 of 86 ProSoft Technology, Inc.
May 11, 2011
Object In GSCInStat Block Offset
Start Description
Server[2].Timeout 155 This status value contains the total number of times a
connection timeout occurred on the socket.
Server[2].CfgErrWord 156 This bit mapped word defines the configuration errors
for the server.
Server[3].Enabled 157 This flag defines if the server is utilized. Y indicates
that the server is enabled. N indicates that the server is
disabled as ASCII string.
Server[3].State 158 This flag defines the current state of the server.
Server[3].IP 159 This double-word value contains the IP address of the
client connected to the server.
Server[3].Port 161 This word value contains the port address for the client
connected to the server.
Server[3].Open 162 This status value contains the total number of times the
server performed an open operation.
Server[3].Established 163 This status value contains the total number of times a
connection was established on the socket.
Server[3].Closed 164 This status value contains the total number of times a
close operation was performed on the socket.
Server[3].RxCount 165 This status value contains the total number of
messages received by the server.
Server[3].RxOverflow 166 This status value contains the total number of
messages received that exceed the specified buffer
size for the server.
Server[3].TxCount 167 This status value contains the total number of
messages transmitted by the server.
Server[3].TxOverflow 168 This status value contains the total number of transmit
messages that exceeded the specified maximum buffer
size for the server.
Server[3].Timeout 169 This status value contains the total number of times a
connection timeout occurred on the socket.
Server[3].CfgErrWord 170 This bit mapped word defines the configuration errors
for the server.
Server[4].Enabled 171 This flag defines if the server is utilized. Y indicates
that the server is enabled. N indicates that the server is
disabled as ASCII string.
Server[4].State 172 This flag defines the current state of the server.
Server[4].IP 173 This double-word value contains the IP address of the
client connected to the server.
Server[4].Port 175 This word value contains the port address for the client
connected to the server.
Server[4].Open 176 This status value contains the total number of times the
server performed an open operation.
Server[4].Established 177 This status value contains the total number of times a
connection was established on the socket.
Server[4].Closed 178 This status value contains the total number of times a
close operation was performed on the socket.