ProSoft Technology MVI71-GEC - Manual (Page 70)

Reference MVI71-GEC ♦ PLC 5 Platform
User Manual Generic ASCII Ethernet Communication Module
Page 70 of 86 ProSoft Technology, Inc.
May 11, 2011
5.4 MVI71-GEC Status Data Area
This section contains a listing of the data contained in the MVI71-GEC status
data object.
Object In GSCInStat Block Offset
Start Description
PassCnt 102 Program cycle counter
Product 103 Product name as ASCII string
Rev 105 Revision level as ASCII string
OP 107 Operating system level as ASCII string
Run 109 Run number as ASCII string
BlkErrs.Read 111 Number of blocks transferred from module to processor
BlkErrs.Write 112 Number of blocks transferred from processor to module
BlkErrs.Parse 113 Number of blocks parsed by module
BlkErrs.Err 114 Number of block errors in module
Server[0].Enabled 115 This flag defines if the server is utilized. Y indicates
that the server is enabled. N indicates that the server is
disabled as ASCII string.
Server[0].State 116 This flag defines the current state of the server.
Server[0].IP 117 This double-word value contains the IP address of the
client connected to the server.
Server[0].Port 119 This word value contains the port address for the client
connected to the server.
Server[0].Open 120 This status value contains the total number of times the
server performed an open operation.
Server[0].Established 121 This status value contains the total number of times a
connection was established on the socket.
Server[0].Closed 122 This status value contains the total number of times a
close operation was performed on the socket.
Server[0].RxCount 123 This status value contains the total number of
messages received by the server.
Server[0].RxOverflow 124 This status value contains the total number of
messages received that exceed the specified buffer
size for the server.
Server[0].TxCount 125 This status value contains the total number of
messages transmitted by the server.
Server[0].TxOverflow 126 This status value contains the total number of transmit
messages that exceeded the specified maximum buffer
size for the server.
Server[0].Timeout 127 This status value contains the total number of times a
connection timeout occurred on the socket.
Server[0].CfgErrWord 128 This bit mapped word defines the configuration errors
for the server.
Server[1].Enabled 129 This flag defines if the server is utilized. Y indicates
that the server is enabled. N indicates that the server is
disabled as ASCII string.
Server[1].State 130 This flag defines the current state of the server.