ProSoft Technology MVI71-GEC - Manual (Page 53)

MVI71-GEC ♦ PLC 5 Platform Reference
Generic ASCII Ethernet Communication Module User Manual
ProSoft Technology, Inc. Page 53 of 86
May 11, 2011
Object in GSCInStat Block
Offset
Start Description
Server[2].CfgErrWord 56 This bit mapped word defines the configuration errors for the
server.
Reserved 57 to 62 This data area is reserved for future use.
Last Write Count 63 This word contains the number of characters written on
server from last BTR block.
If the word 1 of the BTR block is set to -2, the data for the last two servers is
passed to the processor. The format of this block is as follows:
Object in GSCInStat Block
Offset
Start Description
Seq Number 0 Sequence number for this block.
Server Index 1 For this status data block, this word is set to a value of -2.
PassCnt 2 Program cycle counter
Product 3 Product name as ASCII string
Rev 5 Revision level as ASCII string
OP 7 Operating system level as ASCII string
Run 9 Run number as ASCII string
BlkErrs.Read 11 Number of blocks transferred from module to processor
BlkErrs.Write 12 Number of blocks transferred from processor to module
BlkErrs.Parse 13 Number of blocks parsed by module
BlkErrs.Err 14 Number of block errors in module
Server[3].Enabled 15 This flag defines if the server is utilized. A value of 0
indicates the server is not used. Any other value indicates
the server is used.
Server[3].State 16 This flag defines the current state of the server.
Server[3].IP 17 This double-word value contains the IP address of the client
connected to the server.
Server[3].Port 19 This word value contains the port address for the client
connected to the server.
Server[3].Open 20 This status value contains the total number of times the
server performed an open operation.
Server[3].Established 21 This status value contains the total number of times a
connection was established on the socket.
Server[3].Closed 22 This status value contains the total number of times a close
operation was performed on the socket.
Server[3].RxCount 23 This status value contains the total number of messages
received by the server.
Server[3].RxOverflow 24 This status value contains the total number of messages
received that exceed the specified buffer size for the server.
Server[3].TxCount 25 This status value contains the total number of messages
transmitted by the server.
Server[3].TxOverflow 26 This status value contains the total number of transmit
messages that exceeded the specified maximum buffer size
for the server.