ProSoft Technology MVI71-MNET - Manual (Page 16)

MVI71-MNET ♦ PLC Platform Start Here
Modbus TCP/IP Interface Module User Manual
Page 16 of 109
ProSoft Technology, Inc.
June 23, 2009
5 When the download is complete, RSLogix will open another confirmation
dialog box. Click OK to switch the processor from Program mode to Run
mode.
Note: If you receive an error message during these steps, refer to your RSLogix documentation to
interpret and correct the error.
1.7.1 Configuring the RSLinx Driver for the PC COM Port
If RSLogix is unable to establish communication with the processor, follow these steps
1 Open RSL INX .
2 Open the C OMMUNICATIONS menu, and choose C ONFIGURE D RIVERS .
This action opens the C ONFIGURE D RIVERS dialog box.